Data source

Scroll down until you see your sensor or usecase.

G5, G6, ONE and G7⌁

If you connect xDrip+ to your sensor (G5, G6 and ONE), you will not be able to upload to Clarity (use Nightscout or Tidepool). You might be able to use sharing through Dexcom share servers but it needs to be setup with the vendor apps first.

If you use the vendor apps (G5, G6, G7), you can connect xDrip+ through Dexcom Share as long as a follower has been setup.

When using BYODA (G6) if you've enabled Broadcast to xDrip+ you don't need a network connection to have data in xDrip+.

You can add xDrip+ to your current setup and select Companion app to have xDrip+ read BG from the vendor app notifications (G5, G6, G7, ONE).

And this is also possible if you use CamAPS.

Libre⌁

xDrip+ connects directly to Libre 2 EU, you can use Libre 1, Pro and 14 days US with a bridge device. Other Libre 2 and 3 sensors are not directly supported.

You can connect Libre 2 EU to xDrip+, adding OOP2. You cannot upload data to the vendor servers (use Nightscout or Tidepool).

Since Libre 1 don't have bluetooth, you need to add a bridge device. Some of these bridges also work with Libre 2 EU. Check your sensor doesn't require an OOP.

The patched app can send data to xDrip+.

For non-supported sensors you can also use Diabox or Juggluco, then broadcast data to xDrip+.

You can follow a Libre 3 with xDrip+.

Guardian and Minimed⌁

With a 640G/670G pump you need to get BG data from the pump using a glucometer connected to your phone with an OTG cable.

You can add xDrip+ to your current setup and select Companion app to have xDrip+ read BG from the vendor app notifications.

You can follow sensor data when shared through Carelink.

Bluetooth connection to a sensor or a bridge⌁

When connecting xDrip+ directly to a sensor, it will take care of the Bluetooth connection or to the Bluetooth device sending data from your device (called a bridge).

Warning

Do NOT try to use Android Settings -> Connections -> Bluetooth to connect!

If your bridge paired to Android, unpair it before continuing.

One device at a time

Sensors and bridges can only connect to one smartphone (or tablet) at a time, and only to one app at a time.
You should uninstall the vendor app in order to connect xDrip+ to your sensor or bridge.
If another device is connect to your sensor or bridge you should turn it off or disable the other app before trying to connect with xDrip+.
You cannot connect to two phones or applications. With an exception for G6: the second device can only be a receiver/connected pump or a BlueJay watch.

You should now see the the data source selection wizard.